News -

How to solve the joint surface with large deformation of the cylinder or serious air leakage?
25-04-2021
The method of grinding and scraping the bonding surface can be used. If the joint surface of the upper cylinder is deformed within 0.05mm, the joint surface of the upper cylinder shall be the referenc...
What is the coordinate pneumatic cylinder?
20-04-2021
The coordinate pneumatic cylinder is a double-acting pneumatic cylinder with a single piston rod. It has precise guiding function, good load characteristics and strong torsion resistance. The position...
What are the common types of cylinders?
13-04-2021
1. The gas pressure from the cylinder piston is classified as one-way or two-way (1) Single-acting cylinder: The piston of the cylinder can only be driven by air pressure in one direction, and externa...
What problems are easy to encounter in the early installation of solenoid valve?
08-04-2021
The early installation of the solenoid valve is easy to encounter problems: 1. Incomplete cleaning, careless operation, and misuse of tools. It is manifested in that the valve stem, pressure be...
What are the precautions for the design and selection of pneumatic cylinders?
30-03-2021
First. When piping and assembling the joints, prevent the remaining material of the leak-proof belt from entering the pipe. When winding the belt, set aside 1~1.5 teeth. Do not wind the leak-proof bel...
What are the precautions for the use of pneumatic cylinders?
24-03-2021
Note 1. Before piping, it is necessary to prevent foreign matter such as sundries and dust from entering the cylinder, causing malfunctions and erroneous operations. 2. The use of the cylinder is base...